2023 DR Power Equipment DR Tow-Behind Rototiller

Features

• MANUAL DEPTH CONTROL: A simple lever, within easy reach from your tow vehicle, allows you to adjust the tilling depth while you remain seated. Just stop the vehicle, make the adjustment, and resume tilling.
• 12 BOLO TINES: Forged of tough tempered steel, these tines spin at over 230 rpm to dig up to 7-1/2" deep and mix soil completely. The intricately designed sweeps and curves of each tine minimize the wrapping of vegetation.
• BELT-DRIVE SYSTEM: Transfers full power from the engine to the tines. Shear pins on the tine shaft are designed to break if the tines hit an immovable object, to protect the engine and engine shaft from damage. (Four extra shear pins are included and they are simple to install. No tools required.)
• SMOOTH-TRAK™ HITCH: Our unique hitch absorbs shocks and jolts so that minimal forward motion from the tiller is transmitted to the towing vehicle for smoother and easier operation.
• EXTRA HEAVY-DUTY STEEL FRAME: This frame is built to last under punishing conditions. Made of 1-1/2" square tubing and 12-gauge steel. Baked on powder coat finish resists corrosion.
• TRANSPORT TIRES: The tires are resin composite and 9.5" in diameter and 2" wide for easy rolling during transport.
• Height - 38 in.
• Length - 53 in.
• Shipping Weight - 232 lb.
• Weight - 175 lb.
• Width - 38 in.
• Shipping Dimensions - 53.75 in. L x 43.25 in. W x 38 in. H
• Fuel Capacity - 3 qt.
• Run Time - 1-2 hrs approx.
• Number of Tines - 12
• Tine Range - 1 1/2 in. above ground, 7 1/2 in. below ground
• Wheels / Tires Dimensions - 9 in. diameter, 2 in. width
• Frame Material - 12 ga. Steel
• Width - 36 in. wide, up to 7.5 in. deep (variable)
• Manual lever allows you to control tilling depth.
• Shock absorbing hitch absorbs jolts for a smoother ride.